Convertor serial repetor izolator DeLOCK 87586

The DeLOCK 87586 serial converter repeater isolator is a compact USB 2.0 to serial adapter that allows connection of up to two serial devices to a single free USB port. Designed for stable data transmission, it improves signal integrity and offers electrical isolation to reduce interference. The unit measures 107 mm × 65 mm × 23 mm and comes in black, making it suitable for integration into industrial and professional data communication setups.

Advantages

This device combines converter, repeater and isolator functions in one compact housing, ensuring reliable serial communication while protecting connected equipment from electrical noise and potential ground loops. USB 2.0 connectivity provides broad compatibility with host systems, and the slim form factor allows installation in constrained spaces.

Suitable for

• Connecting RS-232/serial instruments or controllers to a USB port
• Industrial automation and factory data collection
• Environments where electrical isolation is needed to protect devices
• System integration where space is limited

Key specifications

• Manufacturer: DELOCK
• Model: 87586
• Interface: USB 2.0 to serial (supports connecting up to two serial devices)
• Dimensions: 107 mm (W) × 65 mm (D) × 23 mm (H)
• Colour: Black
• Functions: Converter, repeater, isolator
• EAN: 4043619875863

How to use

Connect the DeLOCK 87586 to an available USB port on your host system using an appropriate USB cable. Attach up to two serial devices to the serial ports on the unit according to their connector types and pinouts. Ensure that device drivers (if required) are installed on the host system and configure serial parameters (baud rate, parity, data bits, stop bits) in your software to match the connected devices. Verify communication and check for proper isolation where electrical interference was previously an issue.

Recommendations

Place the adapter away from high-voltage sources and route cabling to minimise electromagnetic interference. For critical industrial applications, verify grounding and isolation requirements according to your system specifications before deployment.