Cablu patch InLine SF/UTP Cat.5e alb 1,5m

The InLine Patch Cable SF/UTP Cat.5e white 1.5m is a Cat.5e twisted-pair network cable with SF/UTP shielding and RJ-45 connectors on both ends. It is intended for connecting network components such as switches, routers, wall sockets, patch panels and network cards and supports Gigabit connections (1 Gb/s) up to 125 MHz. The white 1.5 m cable provides a compact, shielded link for structured cabling and desktop setups.

Advantages

SF/UTP shielding reduces electromagnetic interference and crosstalk, improving signal stability in environments with potential disturbances. Cat.5e specification and RJ-45 terminations ensure compatibility with common network devices and support for gigabit speeds. The 1.5 m length is convenient for short runs between nearby devices while the white jacket offers a discreet appearance.

Suitable for

• Connecting switches and routers to patch panels
• Linking PCs or network cards to wall sockets
• Short patch runs in office or home networks
• Gigabit Ethernet connections up to 125 MHz

Key specifications

• Category: Cat.5e
• Shielding: SF/UTP (foil screened with overall braid)
• Length: 1.5 m
• Connectors: RJ-45 to RJ-45
• Colour: White
• Data rate: up to 1 Gb/s
• Maximum frequency: 125 MHz

How to use

Plug each RJ-45 connector into the corresponding network ports on the devices you need to connect (for example switch to patch panel, router to wall socket or PC to switch). Ensure connectors click into place and that the cable is routed without sharp bends or kinks. For best performance, avoid running the cable parallel to power lines or sources of strong electromagnetic interference.

Recommendations

Use this SF/UTP Cat.5e patch cable for short indoor connections where reduced interference is required. Verify that connected devices support Gigabit Ethernet to achieve 1 Gb/s; otherwise performance will be limited by the lowest-capable device.