Cont Contact
Coșul tău
DPD & FedEx – termen de livrare pe pagina produsului.
Ai nevoie de ajutor? Întreabă asistentul nostru AI

Set de burghie DeWALT DT6952

Set de burghie DeWALT DT6952
Set de burghie DeWALT DT6952
38,63 lei
PDF
PDF
Stoc 4 Cod 358883 Model DT6952-QZ Garanție 2 ani

Livrare și retururi

Livrare estimată marți, 8 decembrie
Te ținem la curent prin sistemul nostru detaliat de urmărire
Opțiuni de plată
Card bancarVisaMastercardPayPalApple PayGoogle PayTransfer bancar

Puneți o întrebare – asistentul AI răspunde imediat.

Descriere

Rotary/percussion masonry drill bit set with 130° Douglas-form carbide tips designed for drilling into concrete, brick and stone. The DeWALT DT6952 set contains multiple sizes with reduced shank diameters to fit standard chucks: bits with nominal diameters 10–13 mm have a reduced shank of 9.5 mm, and bits larger than 13 mm have a reduced shank of 12.7 mm. The carbide tips and the shank design provide reliable performance for both rotary and hammer drilling.

Advantages

Carbide-tipped Douglas-form cutting edges provide good wear resistance and consistent drilling performance in masonry materials. Reduced shank diameters allow use in standard drill chucks without an adapter. The set covers a range of sizes to address different hole diameters, and the robust construction suits repeated rotary and percussion use.

Suitable for

  • Drilling holes in concrete
  • Drilling in brick and block
  • Installing anchors and fasteners in masonry
  • General construction and renovation tasks requiring masonry holes

Key specifications

  • Brand: DeWALT
  • Model / MPN: DT6952-QZ
  • EAN: 5011402373413
  • Tip geometry: 130° Douglas-form carbide tip
  • Shank reduction: 10–13 mm bits → 9.5 mm shank; >13 mm bits → 12.7 mm shank
  • Application: Rotary and percussion (masonry) drilling

How to use

Select a drill bit size appropriate for the required hole diameter and the anchor or fastener to be installed. Fit the reduced shank into the drill chuck and tighten securely. For best results in masonry, use hammer (percussion) mode when drilling concrete or hard stone; rotary mode can be used for softer brick or block. Apply steady axial pressure, avoid excessive side load, and withdraw periodically to clear dust and extend bit life.

Recommendations

Use personal protective equipment (safety glasses and dust mask) when drilling masonry. Start at low speed to position the hole, then increase speed as appropriate. Replace the bit if the carbide tip becomes worn or chipped to maintain drilling accuracy and safety.

Caracteristici principale
  • Drilling holes in concrete
  • Drilling in brick and block
  • Installing anchors and fasteners in masonry
  • General construction and renovation tasks requiring masonry holes
  • Brand: DeWALT
  • Model / MPN: DT6952-QZ
  • EAN: 5011402373413
  • Tip geometry: 130° Douglas-form carbide tip
  • Shank reduction: 10–13 mm bits → 9.5 mm shank; >13 mm bits → 12.7 mm shank
  • Application: Rotary and percussion (masonry) drilling

Specificații

Specificații
Greutate
0.13 kg
Istoricul prețului în ultimele 6 luni
Set de burghie DeWALT DT6952
Actual
38,63 lei
Minim 7 zile
38,24 lei
Maxim 7 zile
38,63 lei
Variație 24 h
+0,01 lei   +0%
Variație 7 zile
+0,37 lei   +1%
Variație 30 zile
-11,84 lei   -23%

Scrie o recenzie

Evaluare *
Notă: codul HTML nu este interpretat.

Mai multe produse DEWALT în această categorie

12

Produse populare din această categorie

6
Vânzător: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Lituania · Cod de înregistrare 303192950 · Cod TVA LT100008198612 · Livrare din UE (Lituania)
WhatsApp
Messenger
Bună, sunt asistentul AI al DistriNode. Te pot ajuta să găsești produse, să compari opțiuni, să creezi PDF-uri cu oferte sau să deschizi cereri de suport.
Toate categoriile