Cont Contact
Coșul tău
DPD & FedEx – termen de livrare pe pagina produsului.
Ai nevoie de ajutor? Întreabă asistentul nostru AI

Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s

Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
60 luni
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
281,38 lei
PDF
PDF
Stoc 2165 Cod 1465047 Model 3FE65608AA-BO Garanție 5 ani

Livrare și retururi

Livrare estimată marți, 8 decembrie
Te ținem la curent prin sistemul nostru detaliat de urmărire
Opțiuni de plată
Card bancarVisaMastercardPayPalApple PayGoogle PayTransfer bancar

Puneți o întrebare – asistentul AI răspunde imediat.

Descriere

The BlueOptics 3FE65608AA-BO SFP+ transceiver module delivers a 10 Gbit/s optical link in a compact, metal-housed SFP+ form factor. Designed for multimode fiber applications with LC duplex connections, this module supports high-speed data transfer up to 10000 Mbit/s while offering a low weight of 20 g and a quoted mean time between failures (MTBF) of 1,000,000 hours. The silver-coloured module follows MSA-compliant electrical and mechanical specifications and is intended for use in network equipment that accepts SFP+ pluggable optics.

Advantages

The transceiver provides a standardized SFP+ interface for straightforward insertion into compatible switches, routers and storage hardware. A robust metal housing contributes to mechanical durability and thermal stability during operation. The module’s multimode fibre optic design and LC duplex connector enable simultaneous transmit and receive channels over a single connector pair. Digital diagnostic monitoring (DDM/DOM) capability is supported where host hardware exposes those functions, allowing real-time monitoring of key operating parameters.

Suitable for

  • 10 Gbit/s Ethernet links over multimode fiber
  • High-speed connections between switches, routers and storage systems
  • Data center patching and short-range fiber backbone links (multi-mode)

Key specifications

  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Connector type: LC duplex (multimode fiber)
  • Form factor: SFP+ metal housing
  • Weight: 0.02 kg
  • Product colour: Silver
  • MTBF: 1,000,000 hours

How to use

Install the BlueOptics SFP+ transceiver into an SFP+ slot of compatible network equipment until it clicks into place, then connect LC duplex multimode patch cords to the module. Ensure the host device is configured for a 10 Gbit/s link and that any required software support for third-party modules is enabled in the platform. If the host supports DDM/DOM, monitoring information becomes available through the device management interface for supply voltage, optical power and temperature readings.

Recommendations

Use high-quality multimode fiber patch cords and verify polarity of transmit/receive fibers when connecting LC duplex ends. Operate the module within the manufacturer’s supported temperature and power ranges as specified by your host device, and perform link tests after installation to confirm expected throughput and optical power margins.

Caracteristici principale
  • 10 Gbit/s Ethernet links over multimode fiber
  • High-speed connections between switches, routers and storage systems
  • Data center patching and short-range fiber backbone links (multi-mode)
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Connector type: LC duplex (multimode fiber)
  • Form factor: SFP+ metal housing
  • Weight: 0.02 kg
  • Product colour: Silver
  • MTBF: 1,000,000 hours

Specificații

Specificații
Conector fibră optică
LC
Culoarea produsului
Argintiu
Distanța maximă de transmisie
300 m
Ethernet LAN
Da
Fibră multimod (MMF) compatibilă
Da
Greutate
0.02 kg
Greutatea coletului
30 g
Lungime de undă Rx (max.)
850 nm
Lungime de undă Tx (max)
850 nm
Material carcasă
Metal
Rată maximă de transfer de date
10000 Mbit/s
Standard transceiver SFP
SR
Tehnologie de cablare Ethernet cu fibră optică
10GBASE
Temperatură de funcționare (T-T)
0 - 70
Temperatură maximă de funcționare
70 °C
Temperatură minimă de funcționare
0 °C
Timp mediu între defecțiuni (MTBF)
1000000 h
Tip interfață
SFP+
Tip transceiver SFP
Fibră optică
Istoricul prețului în ultimele 6 luni
Modul transceiver SFP+ BlueOptics 3FE65608AA-BO 10000 Mbit/s
Actual
281,38 lei
Minim 7 zile
276,78 lei
Maxim 7 zile
281,38 lei
Variație 24 h
0,00 lei   0%
Variație 7 zile
+4,60 lei   +2%
Variație 30 zile
0,00 lei   0%

Scrie o recenzie

Evaluare *
Notă: codul HTML nu este interpretat.

Mai multe produse BLUEOPTICS în această categorie

12

Produse populare din această categorie

8
Vânzător: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Lituania · Cod de înregistrare 303192950 · Cod TVA LT100008198612 · Livrare din UE (Lituania)
WhatsApp
Messenger
Bună, sunt asistentul AI al DistriNode. Te pot ajuta să găsești produse, să compari opțiuni, să creezi PDF-uri cu oferte sau să deschizi cereri de suport.
Toate categoriile