Cont Contact
Coșul tău
DPD & FedEx – termen de livrare pe pagina produsului.
Ai nevoie de ajutor? Întreabă asistentul nostru AI

Întrerupător de perete JUNG PMM-AP-SET-WW

Întrerupător de perete JUNG PMM-AP-SET-WW
Întrerupător de perete JUNG PMM-AP-SET-WW
299,99 lei
PDF
PDF

Livrare și retururi

Livrare estimată miercuri, 9 decembrie
Te ținem la curent prin sistemul nostru detaliat de urmărire
Opțiuni de plată
Card bancarVisaMastercardPayPalApple PayGoogle PayTransfer bancar

Puneți o întrebare – asistentul AI răspunde imediat.

Descriere

Wall switch JUNG PMM-AP-SET-WW is a mounting set for ceiling installation of KNX presence detector mini (ref.-no.: 3361 M WW, 3361-1 M WW) and KNX brightness controller mini (ref.-no.: 2096 LUX). The kit includes a design ring with outer diameter 80 mm and inner diameter 35.6 mm; total dimensions (Ø x H) are 80 / 83 x 49 mm measured including the design ring. The set is intended for integration with compatible JUNG KNX devices and supports tidy flush-mounted installation in ceilings.

Advantages

The PMM-AP-SET-WW provides a precise fit for the specified KNX mini devices and a uniform visible finish thanks to the design ring. Its compact dimensions reduce protrusion into the room while keeping required clearances for sensors and controllers. The product is manufactured to match JUNG mounting standards and simplifies installation of presence detectors and brightness controllers in suspended or solid ceilings.

Suitable for

Key specifications

How to use

Prepare the ceiling opening to match the inner diameter and mounting requirements of the selected KNX mini device. Mount the detector or brightness controller into the set according to the device installation instructions, position the design ring so that its outside diameter (80 mm) aligns with the visible cut-out, and secure the assembly in the ceiling. Connect the KNX device electrically following KNX wiring and local electrical regulations.

Recommendations

Install and commission the KNX presence detector or brightness controller only by a qualified electrician. Verify compatibility of the detector/controller reference numbers with this mounting set before installation and follow the device manuals and applicable local installation standards.
Caracteristici principale
  • Ceiling installation of KNX presence detector mini (3361 M WW / 3361-1 M WW)
  • Ceiling installation of KNX brightness controller mini (2096 LUX)
  • Flush mounting in suspended or solid ceilings with an 80 mm visible ring
  • Compatible devices: KNX presence detector mini (3361 M WW, 3361-1 M WW); KNX brightness controller mini (2096 LUX)
  • Dimensions (including design ring): Ø x H = 80 / 83 x 49 mm
  • Design ring inside Ø: 35.6 mm; outside Ø: 80 mm
  • Manufacturer: JUNG; MPN: PMM-AP-SET-WW; EAN: 4011377127869
Istoricul prețului în ultimele 6 luni
Întrerupător de perete JUNG PMM-AP-SET-WW
Actual
299,99 lei
Minim 7 zile
295,24 lei
Maxim 7 zile
299,99 lei
Variație 24 h
-0,01 lei   0%
Variație 7 zile
+4,75 lei   +2%
Variație 30 zile
0,00 lei   0%

Scrie o recenzie

Evaluare *
Notă: codul HTML nu este interpretat.

Produse populare din această categorie

8
Vânzător: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Lituania · Cod de înregistrare 303192950 · Cod TVA LT100008198612 · Livrare din UE (Lituania)
WhatsApp
Messenger
Bună, sunt asistentul AI al DistriNode. Te pot ajuta să găsești produse, să compari opțiuni, să creezi PDF-uri cu oferte sau să deschizi cereri de suport.
Toate categoriile