Cont Contact
Coșul tău
DPD & FedEx – termen de livrare pe pagina produsului.
Ai nevoie de ajutor? Întreabă asistentul nostru AI

Spray GHIANT Lexan negru nr. 610 150 ml

Spray GHIANT Lexan negru nr. 610 150 ml
Spray GHIANT Lexan negru nr. 610 150 ml
49,71 lei
PDF
PDF
Stoc 20 Cod 4338780 Model RCC610 Garanție 2 ani

Livrare și retururi

Livrare estimată marți, 1 decembrie
Te ținem la curent prin sistemul nostru detaliat de urmărire
Opțiuni de plată
Card bancarVisaMastercardPayPalApple PayGoogle PayTransfer bancar

Descriere

This ready-to-use, quick-drying, and fuel-resistant black Lexan spray paint is specially developed for polycarbonate racing bodies.

The special solvent etches the surface to ensure the paint bonds permanently with the polycarbonate.

Designed as a lightweight paint, it can save up to 15 grams of weight on a 1/10 scale race body compared to pre-painted or water-based colored bodies, which also lowers the center of gravity.

Delivered in a 150ml spray can, it should be applied in multiple light coats from a distance of approximately 20 to 30 cm for optimal results.

  • Black spray paint for polycarbonate RC car bodies, 150 ml
  • Specifications
  • Hazard statements (H codes)
  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: may burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • Precautionary statements (P codes)
  • P210: Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.
  • P251: Do not pierce or burn, even after use.
  • P305 / P351 / P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P337 / P313: IF eye irritation persists: Get medical advice/attention.
  • P403 / P233: Store in a well-ventilated place. Keep container tightly closed.
  • P410 / P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
  • Supplemental hazard information
  • EUH066: Repeated exposure may cause skin dryness or cracking.

In the box

  • 1× 150 ml spray paint

Before painting, remove dirt particles, cut out the body and sand the cut edges. Mask areas that are not to be painted with masking film or tape; make sure surfaces are dry and free of dust.

Many bodies have a transparent protective foil on the outside. Do not remove it until the paint has dried.

Paint dark colours before light colours to prevent the dark colours from showing through.

Shake the can vigorously for approx. 2 min. before use, until the mixing ball rattles. Spray from approx. 20–30 cm using even cross movements.

Covering capacity varies slightly by colour. Apply light coats to avoid bleeding; the final result takes 2–3 coats. Wait approx. 5 min. between coats rather than applying one heavy coat. Let the paint dry for 5 minutes before removing the masking film and applying the next coat.

After use, turn the can upside down and spray for 2 s until the nozzle is empty.

Fluorescent colours appear not to cover as well as normal colours. Apply only very light coats at temperatures above 15 °C, spraying from a distance of +/-15/20 cm.

Let fluorescent colour dry for 30 min., then back it with white RC Car Colour to obtain the fluorescent effect.

RC Car Colours is a black paint for Lexan car bodies. The solvent etches the body surface so the paint bonds permanently with the plastic. The paint remains elastic, even in a strong crash, and does not chip or scratch.

  • Highlights
  • Remains elastic
  • Bonds permanently with the body
  • Fuel-resistant
  • Technical data
  • Hazard statements (H codes)
  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: may burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • Precautionary statements (P codes)
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P251: Do not pierce or burn, even after use.
  • P305 / P351 / P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P337 / P313: If eye irritation persists: Get medical advice/attention.
  • P403 / P233: Store in a well-ventilated place. Keep container tightly closed.
  • P410 / P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
  • Supplemental hazard information
  • EUH066: Repeated exposure may cause skin dryness or cracking.

In the box

  • 1× Lexan paint black No. 610, 150 ml
  • Notes

Remove any protective foil on the outside of the body only after painting; the body can be cut out beforehand.

Clean the body thoroughly with dish soap or brake cleaner and shake the can vigorously for approx. 2 min.

Spray the paint from a distance of 20–30 cm. When using multiple colours, start with the darkest, as dark colours can otherwise show through the light ones.

Apply several thin coats instead of one thick coat and wait approx. 5 min between sprays.

Wait at least 5 min before removing the protective film or masking film of the design.

After use, turn the can upside down and spray for approx. 2 s to empty the nozzle.

  • Brand: Ghiant

Specificații

Specificații
Categorie
Vopsele spray
Culoarea produsului
Negru
EAN
5412966226106
Marcă
Ghiant
Material
policarbonat
Model
RCC610
MPN
RCC610
Istoricul prețului în ultimele 6 luni
Spray GHIANT Lexan negru nr. 610 150 ml
Actual
49,71 lei
Minim 7 zile
49,16 lei
Maxim 7 zile
49,71 lei
Variație 24 h
0,00 lei   0%
Variație 7 zile
+0,53 lei   +1%
Variație 30 zile
—   

Scrie o recenzie

Evaluare *
Notă: codul HTML nu este interpretat.

Mai multe produse GHIANT în această categorie

12
Vânzător: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Lituania · Cod de înregistrare 303192950 · Cod TVA LT100008198612 · Livrare din UE (Lituania)
WhatsApp
Messenger
Bună, sunt asistentul AI al DistriNode. Te pot ajuta să găsești produse, să compari opțiuni, să creezi PDF-uri cu oferte sau să deschizi cereri de suport.
Toate categoriile