Cont Contact
Coșul tău
DPD & FedEx – termen de livrare pe pagina produsului.
Ai nevoie de ajutor? Întreabă asistentul nostru AI

Cablu patch MPO-4xLC monomod BlueOptics R4D64A, 10 metri

Cablu patch MPO-4xLC monomod BlueOptics R4D64A, 10 metri
60 luni
Cablu patch MPO-4xLC monomod BlueOptics R4D64A, 10 metri
419,71 lei
PDF
PDF
Stoc 111 Cod 2249152 Model R4D64A-BO Garanție 5 ani

Livrare și retururi

Livrare estimată miercuri, 9 decembrie
Te ținem la curent prin sistemul nostru detaliat de urmărire
Opțiuni de plată
Card bancarVisaMastercardPayPalApple PayGoogle PayTransfer bancar

Puneți o întrebare – asistentul AI răspunde imediat.

Descriere

The BlueOptics R4D64A 10 Meter MPO-4xLC Singlemode Patch Cable is a fiber-optic connection solution engineered for high-density and high-speed optical networks. This 10 m cable uses an MPO connector on one end and four LC connectors on the other, enabling multi-fiber aggregation and straightforward connection to single-channel equipment. Constructed for low insertion loss and consistent signal transmission, the cable is suitable for data center interconnects, backbone links and other professional telecom environments requiring singlemode performance.

Advantages

This singlemode MPO-4xLC patch cable provides stable optical performance across the 10 meter length, with a focus on low attenuation and precise connector alignment. The cable's jacket and connector assemblies are built to withstand repeated mating cycles and standard handling in rack and cabinet environments. Compatibility with standard MPO and LC interfaces simplifies integration into existing infrastructure while reducing the need for adapters or additional splicing.

Suitable for

Key specifications

How to use

Route the cable through cable management pathways and secure it to avoid tight bends or compression that would exceed the manufacturer's minimum bend radius. Insert the MPO connector into the MPO port of the trunk or panel, ensuring correct polarity and key orientation, then connect each LC connector to the corresponding transceiver or adapter port. Verify optical continuity and signal levels with appropriate test equipment after installation to confirm acceptable insertion loss and link performance.

Recommendations

Handle connectors by the housings and keep end faces clean using proper fiber cleaning tools. Avoid kinking the cable and follow standard fiber-optic best practices for bend radius, strain relief and storage. For critical links, perform post-installation testing and document loss values to ensure compliance with system requirements.

Caracteristici principale
  • Data center uplinks and patching between MPO trunks and LC-equipped transceivers
  • Aggregation of multiple singlemode fibers into a single MPO trunk
  • Backbone and campus optical links requiring organized multi-fiber connections
  • Telecom and enterprise network installations where space and port density matter
  • Fiber type: Singlemode (OS2)
  • Connector configuration: MPO to 4 × LC
  • Length: 10 meters
  • Color: Blue jacket
  • Typical application: High-density optical patching and aggregation
  • Performance: Low insertion loss and return loss suitable for singlemode links
Istoricul prețului în ultimele 6 luni
Cablu patch MPO-4xLC monomod BlueOptics R4D64A, 10 metri
Actual
419,71 lei
Minim 7 zile
412,77 lei
Maxim 7 zile
419,71 lei
Variație 24 h
-0,01 lei   0%
Variație 7 zile
+6,94 lei   +2%
Variație 30 zile
0,00 lei   0%

Scrie o recenzie

Evaluare *
Notă: codul HTML nu este interpretat.

Aceeași serie și alternative

12

Produse populare din această categorie

8
Vânzător: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Lituania · Cod de înregistrare 303192950 · Cod TVA LT100008198612 · Livrare din UE (Lituania)
WhatsApp
Messenger
Bună, sunt asistentul AI al DistriNode. Te pot ajuta să găsești produse, să compari opțiuni, să creezi PDF-uri cu oferte sau să deschizi cereri de suport.
Toate categoriile