Lubrifiant pentru lanțuri de bicicletă DRYFLUID (50 ml)

DryFluid Bike is an innovative high-end dry slide lubricant for chains, rear derailleurs, and bowden cables. Neither greasy nor oily, this silicone-free and wax-free formula utilizes dry particles, sliding polymers, and high-end sliding fluids from the aviation and vehicle industries to achieve extremely low sliding friction and long-lasting lubrication. The dust- and dirt-repellent lubricant reduces running noise, improves chain efficiency, and offers pressure-resistant, anti-corrosive, and outstanding adhesive properties with excellent creeping abilities. It comes in a 50 ml bottle and includes a pinpoint dispenser for precise application.

DryFluid Bike is a dry slide lubricant for bike chains, rear derailleurs and Bowden cables. It is not wax, is neither greasy nor oily, and is silicone-free. Its lubrication effect uses dry particles, sliding polymers and sliding fluids. It contains top-class lubricating components from the aviation and vehicle industry and improves the chain's efficiency.

• A pinpoint dispenser is included for precise application.

Highlights

• Extends the life of chains, gearwheels and rear derailleurs
• Dust- and dirt-repellent, with long-lasting lubrication

Pressure-resistant, performance-enhancing and reduces sliding friction

• Reduces running noise and chain wear
• Creeping ability, adhesion and anti-corrosion properties

Specifications

• Content: 50 ml

In the box

• 1× Pinpoint dispenser

DryFluid Bike is a lubricant for bicycle chains, gear systems and cables. It is neither chain oil nor wax, does not oil or grease, and is free of silicones. It contains dry particles, sliding polymers and sliding fluids and does not bind dust or dirt.

The lubricant reduces sliding friction and thus friction losses on chains and gear systems. An initially repeated, economical application increases the long-term effect. A dosing pipette enables precise application.

Clean the parts to be treated before application and shake the bottle to mix the solid particles. The content is 50 ml.

• Reduces power losses of chains and gear systems as well as wear

Multi-stage lubricant system with immediate and long-term lubrication effects

• Does not bind dust and dirt; good creeping ability
• Material compatible with common metals, plastics and rubber materials
• Adhesion and corrosion protection properties

Technical data

• Product name: DryFluid Bike

Colour

• Liquid state: whitish transparent
• Resting state: white

Density

• In liquid state: 0.90 g/cm³
• In dry state: 1.15 g/cm³
• Boiling point liquid: 82 °C

Viscosity

• In liquid state (20 °C): 12 mPa s
• In dry state: not determined

Temperature range

• Temperature resistance: −50 °C to 160 °C
• Recommended temperature range: −20 °C to 120 °C

Specific electrical resistance

• Component microceramic: 10 E+12 Ohm × cm
• Component plastic sliding polymer: 10 E+16 Ohm × cm
• Component sliding fluid: 2.0 × 10 E+3 Ohm × cm
• Total conductivity: > 2.0 × 10 E+3 Ohm × cm

2. Lubricant properties

• Pressure resistance according to DIN 51347: 185 N/mm²

Friction properties in ball/disk test

• Friction coefficient: 0.13

Wear values

• Ball: 57.6 micrometers
• Disk: 85.4 micrometers
• Test institute ball/disk test: Fraunhofer Institute for Surface Engineering and Thin Films
• Test parameters: test load = 300 g, ball diameter = 5 mm, friction track diameter = 27 mm, speed = 30 min-1 (≈ 0.044 m/s), test duration = 60 min, friction distance = 158.4 m
• Disk material: 100Cr6
• Dimensions: d = 5 mm, Ø = 35 mm
• Surface quality: polished (Ra < 0.05 µm)
• Ball material: 100Cr6

Notes

The specific electrical resistance was measured in dry state according to DIN EN 50359.

• Brand: DryFluid